For Price , General inquire , Verification, Delay, Error Reports please Contact us By email : omardhakamobile@gmail.com , Phone: +8801819285385 | Skype: omardhakamobile whatsapp: +8801611162018 | Lumia Direct Unlock with us | iCloud ID remove service ON

Knowledgebase

Knowledgebase

If your Huawei Device is a mobile phone:

1.Switch on your Huawei Phone using another networks SIM card.
2.Your phone should ask for an unlock code(NCK Code).
3. Enter the unlock code we sent you.


To enter code in USB 3G Modem, just follow these instructions :


1) Open Hyperterminal
2) You must set com port on modem (Huawei Mobile Connect - 3G Modem)
3) Type following command : AT^CARDLOCK=”
4) Validate by pressing Enter.


Or you can use this software who do the same job easier :



 Click here to download this tools


 


If you have USB Model E583x Series, please use this software :



 Click here to download this tools


 


 


For Huawei E122


1. Remove the SIM card and connect the USB Modem to the PC


2. Run This application (Download)


3. click - Please Select Com Port


4. click detect and slect your modem from list then click accept


5. click Unlock Modem and enter your 8 digit unlock code


6. click ok


 

Views : 59

Model : Nokia Lumia 900 (AT&T)



1. Switch ON your phone with a non accepted simcard
2. Phone will ask you to Enter Unlock Pin
3. Input the 8 digit Unlock Code

If code is Not working:

The workaround is this: Enter the incorrect code until you run out of your ten (10) attempts. Then you'll get the *real* network unlock message, with 32 attempts. Enter the same 8-digit code you've been entering,

ie: http://www.youtube.com/watch?v=8SO5ZXQy1zM

Model: All Nokia

1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#

(if locked from Fido/Roger Canada, please compose#PW+CODE+7#)

The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )

3 - The phone show "SIM Restriction Off" and was unlocked !

Model: Nokia C3

Turn on the phone with a non-accepted SIM card inserted. It should state that the SIM is restricted.

Press OK to be able to enter the unlock code. Then, using the full QWERTY keypad as normal, type: #pw+CODE+1# and press OK

Note: replace CODE with the unlock code we send you

Views : 34

 


1 – Switch ON your phone with a Non accepted SIM Card,
2 – Phone will ask you to enter Sim unlock pin
3 – Enter unlock code (16 digit code)
4 – Phone will be unlocked

Views : 33

 


1) Insert an unacceptable SIM card to locked phone, now phone should ask unlock code (NP code?). Easy just enter code.
2) Not working?, alright now remove the SIM card and try this code ###825*09# . got the prompt for code? enter the code.
3) Failed above, try *983*8284# . It should work.
4) Try *983*865625# also it’s working on few models of ZTE phones like F102

Views : 26

 


1) open Hyperterminal : C:Program FilesWindows NT (should be there)
2) you must set com port on modem (Huawei Mobile Connect - 3G Modem)
3) type following command : AT^CARDLOCK=""
4) Validate by pressing Enter.

Model: Huawei Ascend G300

Just insert the new Sim card you wish to use,( or any other network Sim other than what it is locked too ),the phone will then tell you it is Sim locked and ask if you want to unlock. Screen will show unlock code line press this then insert code. Phone is now permanently Sim unlocked .

Model: Mini WIFI Modem

1 Insert Non-Optus SIM card into modem
2 Power device on – wait until the device has completed it’s initialization
3 Make sure there is a connection between the WiFi Modem and the client (eg computer)
4 Start an Internet browser and enterhttp://192.168.1.1 in the address bar. (The default password is admin).
5 Enter the password, and then click Login
6 Select Settings
7 Select Dialup and then Unlock SIM
8 Enter unlock code and then click Apply
9 Unit resets itself if successful.

Views : 32

 


Model : HTC SNAP 

- Go to "Setting"
- Go to "Security"
- Select "Unlocking SIM" (at the bottom option)
- Enter Code you receive !

Model : All (including G1)

1 - Switch ON mobile with a not Allowed SIM Card,
2 - If phone ask, enter the PIN code of your SIM Card
3 - Now phone will ask you to enter the unlocking code !

Model : SPV C500

1 - Switch ON mobile with a not Allowed SIM Card,
2 - The message "PUK2" appear,
3 - Enter the Unlock Code we send to you.
4 - Phone ASK for New Code PIN enter : 0000
5 - Confirm and compose : 0000**
6 - Click "Finish" and phone will show "Network is locked..."
7 - Enter the Unlock Code we send to you and click "Finish"
8 - Restart the Mobile who is Unlocked !

How To Unlock CDMA/GSM HTC Phones:

1. Insert not allowed SIM card.
2. Phone will tell you to insert an allowed SIM card and that the phone will switch back to CDMA mode.
3. Click OK.
4. Click green button to get to the main screen of the phone.
5. Click on settings.
6. Click on all settings.
7. In the personal tab click on security.
8. The phone will ask you to enter the unlock code. Enter it. Done.

HTC DROID Incredible 2 - ADR6350VW SIM Unlock Instructions

If customer has a Verizon Wireless SIM card in the Device:
Generate or buy SIM Unlock code 
Go to: Settings -> Security -> Disable SIM card lock + Enter
Enter the SIM Unlock code when prompted.

If customer has non-Verizon Wireless SIM card in the Device:

- Generate or buy SIM Unlock code 
- Have the customer power cycle the device
- Enter the SIM Unlock code when prompted (This will occur when device is powering up)

Views : 26

 


Model : All Motorola

1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.

WARNING : If one of theses messages appear :

- "Contact Service Provider" 
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again !

Model : Motorola A1000 and other A models

1 - Click on the icon Phone
2 - Enter the following keys: ** 057 *
3 - Mobile displays "locking enter personalization"
4 - Enter the unlock code
5 - Click Ok

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.

Motorola 3G 

If your phone is on a 3G network enter **057* 
Then enter the unlock code into the window 

Motorola CDMA & TDMA 

Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code 
Enter the code you receive
Your phone is now unlocked 

Motorola Gleam

Insert a not allowed SIM card. 
Phone will ask enter unlock code

If the unlock code is incorrectly entered three (3) consecutive times the phone will be blocked and stop ask to enter unlock code. In this situation you can 3 try to enter #073887* or Insert not allowed SIM card wait 10-30 min
or Up firmware and do Wipe data/Reset factory.

Motorola MPX 

Switch ON your phone with a not allowed SIM card 
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you 
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you 
Your phone is now unlocked 
If phone is asking for NETWORK PUK 
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu 
Type * # * * 3 6 4 # and press green button 
You will get a error message and after it your will see Engineering menu 
Click Options 
Click GSM Test 
Select Send AT command 
Now you will see a new window Saying "Send AT Command" 
Type AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send 
If you get Response "0 []" phone is unlocked 
If you get 1 error, then make sure you have typed the code correct and try the other code 
Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message "Enter NETWORK PUK" is gone. Now enter the code received from us and 00000000 (eight zero's) as a new password. 

If phone is asking for SERVICE PROVIDER PUK 

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu 
Type * # * * 3 6 4 # and press green button 
You will get a error message and after it your will see Engineering menu 
Click Options 
Click GSM Test 
Select Send AT command 
Now you will see a new window Saying "Send AT Command" 
Type AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send 
If you get Response "0 []" phone is unlocked 
If you get 1 error, then make sure you have typed the code correct and try the other code 
If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you

Model: V3xxr from AT&T Boot 06.24

For those who are experiencing problems with this phone you use this procedure

1 - Get the code from UnlockBase server
2 - Download Motorola Radiocomm v11.7.4
3 - Install Radiocomm and all needed drivers (we recommend 3.5 version)

4 - Open radiocomm and attach the phone wait until phone get connected to radiocomm or until drivers are fully installed if thats the case press "get imei" in radiocomm if imei appears in the screen the we are ready.

5 - Press "gsm3" tab and in the left side of the screen look for "sbsdy_lck" and select "get status" and hit execute if the phone returns 01 means that your phone is locked.

6 - Now select check if valid and enter the 16 digits code from server and hit execute in the upper side of the screen must be appears that subsidy code is done know turn fo your phone and power it on and thats it

Views : 22



How to Enter Unlock Code or SIM network unlock PIN on LG Nexus 4 E960 E960W?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*960#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


How to Enter Unlock Code or SIM network unlock PIN on LG Optimus L9 P769?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*769#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

How to Enter Unlock Code or SIM network unlock PIN on LG Optimus F3 P659?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*659#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

How to Enter Unlock Code or SIM network unlock PIN on LG G2 D801?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*801#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

How to Enter Unlock Code or SIM network unlock PIN on LG Optimus F6 D500?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*500#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

How to Enter Unlock Code or SIM network unlock PIN on LG Optimus T P509?


1: Turn on device with a Not Accepted and dial 2945#*509#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

How to Enter Unlock Code or SIM network unlock PIN on LG Optimus G2X P990 P999?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*999#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


Method 3:


1: Turn on device WITHOUT any sim card and dial 2945#*990#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

 

How to Enter Unlock Code or SIM network unlock PIN on LG myTouch 4G E739?


1: Turn on device WITHOUT any sim card and dial 2945#*739#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 

How to Enter Unlock Code or SIM network unlock PIN on LG myTouch Q C800?


1: Turn on device WITHOUT any sim card and dial 2945#*800#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


How to Enter Unlock Code or SIM network unlock PIN on LG myTouch Q C800?


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


 


How to Enter Unlock Code or SIM network unlock PIN on LG DoublePlay C729?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*729#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


How to Enter Unlock Code on LG GS170?


1: Turn on device with an ACCEPTED sim card and dial 2945#*71001#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


How to Enter Unlock Code or SIM network unlock PIN on LG dLite GD570?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


 


How to Enter Unlock Code on LG Sentio GS505?


Method 1:


1: Turn on device with Not Accepted SIM card.


2: A menu will pop up to Insert the code.


3: Insert the provided code and press OK


4: Device is now unlocked.


If the device does not ask for the unlock code, then go to Method 2


 


Method 2:


1: Turn on device WITHOUT any sim card and dial 2945#*505#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


Method 3:


1: Turn on device with an ACCEPTED sim card and dial *#865625#


2: A menu will pop up chose  option 1 ( Network unlock ).


3: Insert the provided code and press OK


4: Device is now unlocked.


 


Model: LG Optimus L5 (E612)

1. Insert the sim card which works out your phone 
2. Enter 2945#*612# 
3. window appears for the code 
4. Enter the code 
5. the phone is unlocked

Model: LG Optimus F5

1. Insert the sim card which works out your phone 
2. Enter 2945#*875# 
3. window appears for the code 
4. Enter the code 
5. the phone is unlocked 

Model: LG E400 and L3

1. Switch ON the phone without SIM Card,
2. Press the "CellPhone" icon at the bottom of the screen to show the keypad,
3. Compose 2945#*400#
4. A new menu will appear, select "SIM Unlock"
5. Enter the Unlock Code and press OK
6. The phone will restart and is now unlocked !"

Model : LG Optimus G (E973 / E970)

1. Turn on phone with Not Accepted SIM card.
2. A menu will pop up to Insert the code.
3. Insert the provided code and press OK
4. Device is now unlocked.

Model : LG Optimus 3D P920

1. Power on your LG phone with the original SIM card in.
2. Enter 2945#*920#. 
3. A menu will pop up, select SIM Unlock or network lock.
4. Enter your NCK unlock code and hit OK.
5. Your LG phone may automatically reboot.

Model : LG Cookie Style T310

1 - Power ON the phone with a not accepted simcard,
2 - Type 2945#*310# to enter unlock menu,
3 - Enter unlock code.

Model: LG GT400 Viewty Smile

1. Switch ON the phone without SIM Card,
2. Press the "CellPhone" icon at the bottom of the screen to show the keypad,
3. Compose 2945#*400#
4. A new menu will appear, select "SIM Unlock"
5. Enter the Unlock Code and press OK
6. The phone will restart and is now unlocked !

Model: LG Optimus 2X 

1. Insert the sim card which works out your phone
2. Enter 2945#*990#
3. window appears for the code
4. Enter the code nck received
5. the phone is unlocked

Model: LG Optimus 7 and LG-E900

1 - Insert SIM Card from a not accepted SIM Card
2 - Type the PIN Code of your SIM Card and submit it
3 - The message "... Please call your network provider to get the unlock code" will appear

But on the bottom of the screen, the keyboard is still here with "#" and "*" and invite you to "Type PIN"
Just submit the code you receive and that's it !

Model: LG P500 Optimus

1. Power ON your phone with not allowed sim card (one that didn’t come with the phone)
2. Type 2945#*500#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

Model : LG GW300 Viewty & Gossip

1. Power on your LG Viewty GW300 with the original SIM card in.
2. Enter 2945#*71001#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!

Model: LG GT350 Town

1. Power on the LG GT350 Town with the original SIM card in.
2. Enter 2945#*350#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. The LG GT350 Town will restart..
6. Put in any sim card you want, you will need to make a call for the new sim card to initialise with the phone.
7. Thats it, mobile unlocked.

Model: LG GM360 Viewty Snap

1. Power on your LG Viewty GM360 with the original SIM card in.
2. Enter 2945#*360#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.

Model: LG GS290 Cookie Fresh

1. Power phone ON with original SIM
2. Type 2945#*290# to enter unlock menu
3. Enter the unlocking code

Model: LG GT400

1. Turn phone on without simcard
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*400#
4. A menu will pop up, select network unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete

Model: LG GW620

1. power phone ON with original SIM
2. type 2945#*620# to enter unlock menu
3. Enter the unlocking code

Model: LG GM205

1. switch on your phone with original working simcard
2. enter code 2495#71001# .. nothing will show in the screen.
3. now go to menu > setting > security > simlock > network lock > deactivate: enter your unlock code in it

Model: LG GW820 eXpo

1. Power on your LG GW820 eXpo with the original SIM card in.
2. Enter 2945#*700#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG GW820 eXpo may automatically reboot.

Model : LG GM205

1. Power phone ON with original SIM
2. Type 2945#*71001# to enter unlock menu
3. Enter the unlocking code

Model: LG GB250, GB220

1. Power on your phone without SIM card
2. Enter 2945#*71001#
3. From the menu that pops up select "SIM unlock"
4. Enter unlock code you received from UnlockBase and press OK
5. The phone will then reboot and the unlock is complete 

Model : LG GW520

1. power phone ON with original SIM
2. type 2945#*71001# to enter unlock menu
3. Enter the unlocking code 

Model : LG Viewty / GW300

1. Power on your LG Viewty GW300 with the original SIM card in.
2. Enter 2945#*700#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK. (Entering multiple incorrect unlock codes may permanently lock your phone!)
5. Your LG Viewty GW300 may automatically reboot and should now be unlocked!

Model: LG BL20

1. insert original sim card and turn phone on.
2. Enter 2945#*20#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok

Model: LG BL40

1. insert original sim card and turn phone on.
2. Enter 2945#*40#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok

Model : LG C1100 

- First you must put in an allowed simcard, then :
- type 2945#*1201#.
- Goto Menu/Settings/Security Settings/Sim Locks
- Select 'Locktype'/Deactivate and Enter the code.

Model : LG GT505

- power phone ON without SIM
- type 2945#*505# to enter unlock menu
- enter unlock code

Model : LG GB250

- power phone ON without SIM
- type 2945#*71001# to enter unlock menu
- enter unlock code

Model : LG GW520

- power phone ON without SIM
- type 2945#*71001# to enter unlock menu
- enter unlock code !

Model : LG KB770

1. Power on phone with original SIM card
2. Type 2945*#770#
3. In the menu that appears select Sim unlock
4. Enter supplied unlock code
5. Your phone is unlocked 

Model : LG KP170

1 - Switch ON your phone with a T Mobile Sim inserted 
2 - Press telephone icon at bottom of screen to bring up the phone keypad
3 - Then compose : 2945#*170#
4 - A menu will pop up, select Unlock Usim
5 - Then Select Network Lock
6 - Enter your unlock code and press ok (you only have 10 attempts)
7 - The phone will then reboot and the unlock is complete.

Model: LG CU-515

1.Put a SP-locked sim in the phone, phone say invalid smart chip
2.Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code
Phone will be unlocked!

Model : LG TE365

1. Power on phone with original SIM card
2. Type *#0001#code#
3. Your phone is unlocked 

Model : LG CT810 (Incite)

1. Power on phone with original SIM card
2. Type 2945#*810#
3. In the menu that appears select Sim unlock
4. Enter supplied unlock code
5. Your phone is unlocked 

Model : LG CB630 (Invision)

1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.

Model : LG U830 

1. Have your unlock code handy.
2. InserI a 3 SIM card in the phone and switch power on.
3. Enter the following key sequence 94471877#*#
4. Select the option ‘unlock USIM’.
5. Select the option ‘network unlock’
6. Enter your unlock code.
7. Handset should now display ‘network unlock success’.
8. Handset will now restart.

Model : LG KF300

1. Put wrong simcard
2. Phone alert 'insert correct card'
3. Right under in screen you see deblokkeren (dutch)
4. Click on it en click 'Network lock off'
5. Insert code!

Model : LG KP100

1. Insert original sim card and turn phone on.
2. Enter 2945#*20001#
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG KF755d 

1. Insert original sim card and turn phone on
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*755# (or 2945#*750# if 1st option doesn't work)
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete

Model : LG Incite CT-810

- Insert a SIM from the original network 
- 2945#*810# will show the unlock menu
- Enter unlock code

Model : LG KP265

1 - Use Original SIM to switch ON the Phone.
2 - Compose 2945#*265#
3 - Then go to MENU > SETTINGS > SECURITY
4 - Then go to SIM LOCKS > NETWORK > DESACTIVATE
5 - ENTER NCK (your Unlock Code)

Model : LG ME550

1 - Use Original SIM to switch ON the Phone.
2 - Compose 2945#*71101#. 
3 - Menu will appear, go to settings > security > sim lock
4 - Enter NCK ( Unlock Code ) and press OK.

Model : LG TU915

- Switch ON your phone with an allowed SIM Card
- Then compose: 2945#*9701#
- It should you ask you for the code. 

OR

Enter *#865625# then enter your 16 digits code.

Model : LG KF390, KF390q and CF360

1) Insert a SIM Card from the network the mobile is locked to and turn it on
2) Insert the following sequence *#865625#;
3) Select 'Unlock USIM'
4) Select 'Network Lock'
5) Insert the unlock code
6) Select ok. Done!

Model : LG G910 :

1. Insert an invalid simcard and turn phone on.
2. Insert PIN
3. Phone says \"Invalid sim card\"
4. Select \"Emergency calls\"
5. Enter 2945#*71001#
6. Sim unlock mode pop up
7. Select netlock
8. Enter your 16-digit unlock code and press ok
9. The phone will then reboot and the unlock is complete.

Model : LG Prada, KE850 :

1. Switch the telephone on with Original SIM card inside.
2. Enter SIM pin if required.
3. Enter 2945#*8501# and press the call button (middle button bottom of the screen).
4. SIM unlock mode will appear on screen.
5. Enter unlock code
6. Select Reboot.
7. Switch phone off, and then turn back on again. Phone is now unlocked

Model : LG CT810

1. insert original sim card and turn phone on.
2. Enter 2945#*810#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG VU CU915 & CU920 (Vu)

1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2. Enter *#865625# then the 16 digit unlock code
3. Device should say: Network Lock Deactivated
4. Phone may automatically reboot and is now unlocked !

Model : LG U310 

1. Turn ON the phone without SIM Card :
2. Enter 815118#*# 
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG iQ

1 - Switch ON mobile with a not Allowed SIM Card,
2 - If phone ask, enter the PIN code of your SIM Card
3 - Now phone will ask you to enter the unlocking code !

Model : LG KC550, KS360, KP230, KP500, KP501, KP270, KM900, KM500, GT810, GC900, GT360

1. Insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG KF700 (aka LG Virgo)

1. insert original sim card and turn phone on.
2. Enter 2945#*700#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG KC910, KF910 (aka LG Prada)

1. insert original sim card and turn phone on.
2. Enter 2945#*910#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG KF750 

1. insert original sim card and turn phone on.
2. Enter 2945#*750#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG KF600

1. Insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. Sim unlock mode pop up .
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

Model : LG U970 

1. Insert original sim card and turn phone on.
2. Enter 2945#*970#
3. A menu will pop up, select Unlock Usim.
4. Select Network Lock.
5. Enter the unlock code and ok.

Model : LG U300

1 - Switch ON the phone with Accepted SIM Card (from Original Network Provider)
2 - Enter Code : 815118#*# 
3 - then phone will ask to enter NCK

Model : LG C2000:

1) Insert non-Cingular SIM card
2) Power on the handset - phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM Unlock code
5) Select "OK" - the handset is now successfully unlocked

Model : LG KU990 Viewty & KE990

1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.

or

1. Without sim phone power "ON" 
2. Hold "camera" + "lock" button 
3. You will get key pad write 2945#*990#. 
4. Press active code. 
5. Your cellphone will be restart
6. Turn off cellphone and insert your sim (internation sim) 
7. Enjoy your unlocked phone !

Model : LG TU720 - LG CU720 (Shine)

1) Power ON your phone with not allowed sim card (one that didn't come with the phone)
2) Type *#865625#
3) the phone will ask you to input the unlock code twice, just input the unlock code
4) Device is now unlocked

Model : LG CE110

1) Put a non AT&T or Cingular SIM in the phone;
2) The phone display: Invalid Smart Chip 
3) Power on handset 
4) Select "Cancel" - phone displays "phone restriction code" 
5) Enter the unlock code (8 digit code*) 
6) Select "OK’" - the handset is successfully unlocked 

Model : LG GR500 (Xenon)

1) Insert not-allowed SIM card
2) Power on the handset- phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM unlock code
5) Select "OK" - the handset is now successfully unlocked

or 

1. insert original sim card and turn phone on.
2. Enter 2945#*9701#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

or 

After turning on your mobile phone, press: *#865625#
Press Yes to continue.
Enter the 16 digit Subsidy Unlock Code
Enter the 16 digit Subsidy Unlock Code, again.
Device should say: “Network Lock Deactivated”
Phone may automatically reboot

Model : LG CU320

1) Power on the handset
2) In Idle screen, input the special code "277634#*#".
3) Enter the SIM Unlock code
4) Access the submenu "SIM Test" in Phone Test Mode.
5) Input the special code "2945#*#".
6) Access the submenu "SIM Unlock" which is just activated after the special code.
7) Input the 8-digit Unlock code in the "Enter unlock code" input screen.
8) It will be unlocked.

Model : LG CU400 & CU405

1) Insert non-Cingular SIM card"
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter 159753#*#
4) Enter the 8 digit SIM Unlock code
5) Select "OK".
6) The handset will be unlocked.

Model : LG CU500

1) Insert non-Cingular SIM card.
2) Power on the handset. Phone will display "Invalid SmartChip"
3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4) In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5) Enter the 8 digit SIM unlock code
6) Select "OK"
7) The handset is now successfully unlocked.

Model : LG CU515, CU575 (Trax)

1) Put a non-Cingular sim in the phone
2) Phone says invalid smart chip
3) Now enter *#865625# then select option 1 and then again select 1
4) Enter your 16 digits code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.

Model : LG U8150

1 - Switch ON your phone with a NOT Allowed SIM Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.

Model : LG U400

1. Insert the network SIM in the handset which has given u the LG U400. 
2. Enter 2945#*88110#. 
3. The phone will then prompt 'Unlock sim'. Press OK. 
4. The phone will then prompt 'Network Unlock'. Press OK. 
5. The phone will then prompt- 'Input Network Control Key'. 

Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code. 

6. It should give you the message Success. 
7. Come back to the main screen and Enter 2945#*88110#. 
8. The phone will then prompt unlock sim. Press OK. 
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code. 
10. Then press OK

Model : All other model

1 - Switch ON your phone with an Allowed SIM Card,
2 - Then compose : 

2945#*5101# - (if you have a LG 510w) 
1945#*5101# - (if you have a LG 1200 & B1200) 
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300) 
2945#*5401# - (if you have a LG 5400) 
2945#*70001# - (if you have a LG 7020) 
2945#*7101# - (if you have a LG 7100) 
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)

3 - Go to "Menu" and then to "Settings",
4 - Then select "Security",
5 - To finish select "Network Provider" and select "Desactivate"
6 - Enter the Unlock Code we send to you.

Model : To Classify 

For the next models u must to insert the original SIM:

LG KF245c press 2945#*7101#
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#

After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*# 
LG KU800 press 82652#*# 
LG L600v press 815118#*# 
LG U8150 press 277634#*# 
LG U8210 press 277634#*# 
LG U8500 press 277634#*# 
LG U400 press 2945#*88110#
LG KC550 press 2945#*71001#
LG KU580 press 2945#*580#
LG KT520 press 2945#*520#
LG KF750 press 2945#*750#
LG KF600 press 2945#*71001#
LG KG275 press 2945#*20001#
LG KU380 press 2945#*380#
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KS500 press 2945#*500#
LG KP270 press 2945#*270#
LG KF240 press 2945#*240# or 2945#*2401#
LG KG290 press 2945#*7101#
LG KU250 press 2945#*250#
Enter NCK and press OK.


Views : 6015

Update 24 August 2013: If you trouble to enter code and/or if code is not accepted on Samsung Galaxy S3 or Note 2, then please follow the instructions below :



(1) Make sure that the phone PROMPTS for the code with a NON accepted SIM Card.
(2) And that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#197328640# 
b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK
c. You will see 3 options
d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
e. Please hit the MENU button then when the menu pops up please carefully hit BACK 
(to return to the previous screen)
f. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
g. Restart the phone on the screen by holding the power button and click RESTART
h. When the phone prompts for the unlock code simply enter the unlock code provided to you
i. Your phone is now permanently unlocked!



Update 23 August 2011: If you have trouble to enter code and/or if code is not accepted on Samsung Android Phone like Samsung T959, then please try to make "Factory Reset" following the instructions below :

1 - Shut your Android Galaxy S down (Power off) or remove Battery.
2 - Now press Volume up, Home and Power together.
3 - If the Samsung Symbol is comming up leave the Home Button.
4 - Then there is a boot Menu
5 - Volume Up and Down to Navigate , Home to select the choosen option.


Our instructions are GLOBAL instructions for all unlocking services. Instructions about unfreeze are meant for people who have purchased a FACTORY SAMSUNG GENUINE UNLOCK CODES service, which include UNFREEZE code. If you have purchased a carrier unlock code (from you network provider): this service does not include UNFREEZE code. If you have FREEZED your phone, the unlock network code won't help to unfreeze, only unfreeze code will reset freezed phones.

-
Step 1: Determine the lock level of your Samsung
-

If you have ordered unlock codes from our website, you will have been pleased to see that every possible unlock code has been emailed to you.

The unlock codes emailed to you will look something like this:
Unfreeze: 12345678 NCK: 12345678 SCK: 12345678 SPCK: 12345678

Most networks only lock their Samsung handsets with the NCK lock enabled. Therefore you should only need to use this code when following the input instructions (see step 2). However some networks will have dual locks in place (whereby the NCK and another lock is enabled) or they may have just an alternative lock level such as SCK or SPCK.

It is best practice to be 100% sure which lock level is present on your handset, to do this follow these instructions:

Enter the following code into your handset while it is turned on and connected to its locked network.

By this we mean the connected to the network your handset is locked to (if you are locked to Orange, insert an Orange SIM card into your handset)

Once connected, enter this code: *#7465625#

A menu will be displayed that will resemble the following...

1. [xxx] Network lock
2. [xxx] Subset lock
3. [xxx] SP lock

(xxx = Value ON or OFF)

If only the Network lock is displayed saying ON then you will only need to use the NCK code with the instructions below. If you see the Subset lock value as ON then you will need the SCK code and if you see the SP lock value as ON you will need the SPCK code.

The unfreeze code we send you should only be needed if:

(a) You accidentally freeze your handset by entering too many incorrect codes or not following our unlock instructions accurately.
(b) Your handset displays the 'phone freeze' message whenever an alternative network SIM card is inserted into your phone prior to it being unlocked.
(c) You see the 'return for service' message.

Now you know the correct lock level of your handset and thus the correct code required for input, you may continue...

NB: If your handset does not accept the code to locate your lock level, simply move straight on to step 2 of this guide...

-
Step 2 : Input Instructions
-

Model : Samsung 3G handsets, Zxxx & Dxxx, A707, U900 Series

1- Switch ON your phone with a non accepted SIM Card,
2- Compose: #7465625*638*CODE# (or *#7465625*638*CODE#)

Model : Samsung Z105 & Z107
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#

Model: Samsung i616 Jack or Blackjack2 from Fido Canada

1. Power ON your phone with a FIDO SIM Card that the phone is locked to
2. Type #7465625*638*
3. Network Lock Screen appear, enter UNLOCK CODE
4. Device is now unlocked

Model: Samsung A767 (Propel), A437, T459 (Gravity):

1 - Power on without SIM
2 - Type in #7465625*638*Unlock code# (8 digit unlock code*)
3 - Device should say: “Network Lock Deactivated”
4 - Phone may automatically reboot

Model: Samsung SGH-T459 (Gravity):

1. Power on without SIM 
2. From the standby screen, use the dial pad to enter the number sequence 
3. Type in #7465625*638*Unlock code# (8 digit unlock code*) 
4. Device should say: “Network Lock Deactivated” 

Model: Samsung i900 / Omnia

1 - Switch ON your phone with a NON Accepted SIM Card,
2 - Enter the pin code of this refused Simcard
3 - Device is now asking for another pin code
4 - Then enter the Unlock Code !

Model: Samsung Zxxx, Dxxx, Pxxx, T139 & F490 (ex : Z140, D520, P200, etc...)

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#

Model: Samsung Z510 et Z320i et Z650i :

1 - Switch ON your phone with a not Accepted SIM Card,
3 - Compose **CODE#

Model : Samsung i450, i560 & i8910

1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#

The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )

Model : Samsung i780

1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen an "exclamation mark" icon will appear
4. Click on "exclamation mark" icon
5. There will appear link "settings" - click on it
6. Virtual keyboard appears on screen with Enter PIN prompt.
7. Enter your 8-digit unlock code.

Model : Samsung i900

1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen a "lock" symbol with the letters NET will appear
4. You will also be presented with the options "OK"; "Dismiss"
5. Press the "OK" option
6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear).
7. Enter your 8-digit unlock code.
8. Your phone is now unlocked

Model : Samsung SGH-P207:

1. Reset to original factory setting by typing *2767*3855#, youre phone will reboot
2. Then insert a sim card that is from another network that your phone is not locked to.
3. An Wrong sim message will come up on the screen 
4. When message appears type in* #9998*3323#
5. At this time a white screen will appear which says "exit"
6. Tap the rigth soft key, (occasionally it will not go to the next screen, if so press the down key)
7. From the menu that appears scroll down to the malloc Fail option, this will reboot, and normal service screen will appear.
8. Then type *0141# and press the green call key, Personalized will appear on the screen, and the name of the current sim card provider will appear on the screen.
9. Turn phone off, and then turn on
10. Go to menu by tapping left soft key, then settings in bottom right hand corner, then choose option number 7 security, then choose option number 6 Sim Lock, select option 1 disable
11. Then enter 00000000 (eight zeros), the message will come up sim lock disabled with a check mark, your phone is now unlocked to use with other carriers.

Model : All others Samsung

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.

OR (if phone show "Insert Correct SIM Card")

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#

OR

1 - Switch ON your phone with an unaccepted SIM Card,
2 - The Phone will then ask for the Code or Password
3 - You can now enter the Unlock Code we sent to you.

-
Step 3: Trouble Shooting
-

If your handset freezes for whatever reason and displays the 'Phone Freeze' or 'Return for Service' message then you will need to use the unfreeze code that was issued with your unlock codes.

Below you will see a list of instructions for entering the unfreeze code into different models of Samsung handsets.

Choose the handset instructions closest to your own model if it is not directly available. (i.e. if you have a Samsung i900, consider using the Samsung F480 unfreeze instructions).

NB: Unfreeze instructions are given as an added bonus to your unlock service. This is not the service you purchased and therefore it is provided free of charge.

Reasons for "Phone Freeze"

1. Inputting the unfreeze code rather than the unlock code into your handset.
2. Following the incorrect input procedure for your handset (these must be followed 100% correctly).
3. Handset automatically displaying "Phone Freeze" when an unaccepted SIM card is inserted into the handset, however when the accepted SIM card is inserted, the handset works fine.

Unlocking the phone when in "Phone Freeze"

In order to unlock your handset when the phone is frozen, you need to have access to the handset keypad.

Please note the following information is not provided with any guarantee or warranty of success as the unfreeze codes we provide are issued free of charge as an added bonus with certain Samsung unlocking services.

Option 1 (usually used with keypad Samsungs - U900 etc)

While an unaccepted SIM card is inserted
Enter the unfreeze code
Hit OK (either the left soft key, or in the middle of the touch-field)
Your handset may or may not display an unfreeze message
Now enter your unlock code (see step 1 above to determine this)
The phone should now unlock

or

Option 2 (usually used with touch screen Samsungs - F480 etc)

With Original SIM card in handset
Enter #7465625*638*UNFREEZE CODE
Phone Unfrozen
Input unaccepted SIM card into handset
Enter #7465625*638*UNLOCK CODE#
Your Phone should now unlock

or

Option 3 (possible with any Samsung handset)

While an unaccepted SIM card is inserted
Enter unfreeze code
Hit OK
Enter unlock code
Your phone should now unlock

Please note once again, these instructions for frozen handsets are used at the owners risk.

Unfreeze codes are supplied as a bonus for certain Samsung services and we make no warranty or guarantee of their success.

If in doubt, our customers may wish to have their handset manually unfrozen by a local independent mobile phone specialist before returning to use the unlock code we provided which is 100% accurate for your handset.

Instruction on how to unlock Samsung SGH-A107:

1. Turn ON your phone without Sim Card
2. Enter #7465625*638*Unlock Code#
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed

Instructions for Samsung Galaxy Note II (Troubleshoot):

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

a. Go to the Dial pad and dial *#197328640# 
b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK
c. You will see 3 options
d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
f. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
g. Restart the phone on the screen by holding the power button and click RESTART
h. When the phone prompts for the unlock code simply enter the unlock code provided to you
i. Your phone is now permanently unlocked!

Views : 187

Model : Method Generic

1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.

Model : 531 & 535

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.

Model : All other Alcatel

1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you

Views : 38

How To Read Blackberry MEP Name:


 


Each Blackberry model have many version, each version came with one unlock code.  We could provide you all the possibility, but that could harm your phone, you only allowed between 5 to 10 mistakes depend on your carrier.  In order for us to provide you with ONE working unlock code, we need your help to get the MEP Name.  Here is how to get the MEP Name:


   


MEP Name without Cable:  


1.    Access the “Help Me” menu by pressing Alt+Cap+H key (hold all three keys at the same time from main menu).


      Notice:


For Pearl and other sure-type (two characters on 1 key) model; hold Alt (Bottom left) and type EACE (character is not case sensitive). 


For Storm; hold the BACK arrow and tap the screen in the following area: TOP LEFT, TOP RIGHT, TOP LEFT, TOP RIGHT.


 



 
  


2.  Find the following information:


a. Blackberry Device PIN:           example: cc414bfc


b. App Version:                              example: 4.6.0.100 (233)


c. Uptime:                                        example: 908208


 


 


         3. "Help Me" Menu will open. You need to look for PIN, App Version and Uptime information similar to above. Enter this information into the box below to generate the "Key Code".  You must type the information into the box EXACTLY including the period, space, and parentheses.


 Key generator upload very soon. 


 4. Once you have the Key Code.  Type this Key Code directly into your Blackberry.  Remember to press alt key for the number and release alt key for character (example: if Your Key is 7A00EF7B, you need to press alt 7, A, alt 0, alt 0, E, F, alt 7, B (character is not case sensitive). You will not see anything on the screen as the key is being type.


 


5.  Engineering Screens Contents will open.  Select “OS Engineering Screens” and "Device information" will open.


 


      


  


6.  Device information will open.  Scroll down and find your Blackberry MEP Name. For this sample, the MEP Name is 04104-007 (Your MEP Nmae may be different)  Now you have your MEP Name, give us this MEP Name.


         

Views : 51


  1. Yes it is completely legal and you will not void the warranty on the phone!

  2. We have unlocks for most of the major phone manufacturers including Blackberry, HTC, Samsung, Nokia, Sony Ericcson, LG, Huawei, Palm, HP and many more! If you do not see your manufacturer listed below please contact us! 

  3. By buying a code from us you are getting the fastest and highest quality service available on the market. We offer 100% working unlock codes from all the major manufacturers or your money back.

Views : 41


  1. We are the direct source for IMEI remote unlock codes.

  2. We have the fastest processing times 

  3. We guarantee our services. If a code is "Not Found" or if the code isn't working we will give you a 100% refund.

  4. If you are having problems unlocking your device our knowledge staff and support will guide you through the procedure.

Views : 38

Model : Blackberry 9530 Storm

1. Insert any SIM card and turn ON your Blackberry.
2. Turn OFF all the wireless connections.
3. Go Back One Step by Pressing the Back Key.
4. Go to Options
5. Select SIM card.
6. Press the Menu Key and select "Show Keyboard".
7. Tilt the phone in Horizontal Position so that the Keyboard is displayed in the Landscape Mode.
8. Type MEPD [you will not be able to see the typed info].
9. Then enter MEP2
10. Now your Blackberry will ask you to enter network MEP code
11. Enter the Unlock Code provided by us to you and Press the Enter Key on the Screen.
12. It will now say "Code Accepted'.
13. Congratulations! Your phone is now unlocked. Now your phone can be used with any GSM Network with SIM Card.
14. Go back to the Home Screen. Press the Menu Button and click on Manage Connections.
15. Turn all the Connections ON.The phone will now reboot and ''Activation Required'' will no longer be displayed.

Model : BlackBerry Bold 9000 & Torch

1) Make sure your SIM card is NOT inserted into the device.
2) Turn on the phone and click the “Manage Connections” icon. Choose the option “Turn off all connections.” The cellular radio will be turned off.
3) Go back to the Home screen and click the “Options” icon and select “Advanced Options.”
4) Scroll down and select “SIM Card” from the list.
5) Press the following keys in order: (M) (E) (P) (E)
6) A prompt will appear asking for the unlock code. Input the 16-digit code exactly.
9) Reboot your device.
10) Re-enable the cellular radio

Model : Curve, 8300, 8310, 8320, 8800, 8820

Must be done without a sim card inserted & wireless radios must be turned off.

1. Go to settings. 
2. Go to options. 
3. Go to advanced options. 
4. Go to sim card. 
4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ). 
5. It will say "Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm. 
6. Your phone is now unlocked. 

Model : BlackBery Storm (9500)

1. Insert any sim card 
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keybord
7. Enter mepd (you will not be able to see the typed info)
8. Enter mep2
9. Now it will say enter network mep code

Model : BlackBerry 8700

Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked. 

Model : BlackBerry 8800

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from UnlockBase.com and press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked

Model : BlackBerry 8100 Pearl

1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.

-

Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

6. Select “Turn Wireless Off”

7. Select “Settings” Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.



Model : All BlackBerry

1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked

Views : 64

 This guide is for Galaxy Phones only


 


Explanation of the codes you may get for samsung


 


NCK - Network control Key


SPCK - Service provider control key


MCK - Master Control Key  ( Same  Defreeze/Unfreeze codes)


 


For USA models, in case if you get  NCK and Defreeze and NCK code is not unlocking the phone, do this:


1.Restart the phone with unaccepted sim card.


2. Once the phone ask for Network Unlock Pin type the DEFREEZE/UNFREEZE  code you got and click Unlock


3. The phone may say Network unlock Unsuccessfull (dont worry)


4. Right away type the Network Unlock code (NCK) again and click  Unlock again.


5. The phone will be unlocked.


_________________________________________________


 


In case if you get NCK code only for some USA models and it does not work check this:


 


Solution for "Network Unlock Unsuccessful" or "Code Error"

 

"Code Error", "Network unlock unsuccessful", "Service Provider unlock unsuccessful" What do I do?


 

 



Solution #1 (Please find your appropriate model)


 


Samsung Galaxy  S3, Note 2, i437, i537, i547 Rugby Pro, S4 Active 4.2.2


1. Please power on the device with a non accepted SIM card inserted, make sure the phone prompts for a SIM network unlock PIN


2. When asked for the SIM network unlock PIN, please select dismiss and follow the steps below :


a. Go to the Dial pad and dial *#197328640# 


b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK


c. You will see 3 options


d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly


NOTE: If you see ENABLE_FLAG[1], contact us. If you see ENABLE_FLAG[0], continue on.


e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen


f. Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message


NOTE: If you see ENABLE_FLAG[1], contact us. If you see ENABLE_FLAG[0], continue on.


g. Restart the phone on the screen by holding the power button and click RESTART


h. When the phone prompts for the unlock code simply enter the unlock code


i. Your phone is now permanently unlocked!


 


T599 Mobilicity ,T599N Metro PCS


Use provider code or subprovider code


 

T999L, Galaxy Ace, All Canada S2, All Canada Note 1
 

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#

 

a. Go to the Dial pad and dial *#197328640# 

 

b. Please click on number Debugging screen > Phone Control >  SIMULATION > NETWORK LOCK

 

c. You will see 3 - 4 options

 

d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

NOTE: If you see ENABLE_FLAG[1], contact us. If you see ENABLE_FLAG[0], continue on.

 

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

 

f. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

NOTE: If you see ENABLE_FLAG[1], contact us. If you see ENABLE_FLAG[0], continue on.

 

g. Restart the phone on the screen by holding the power button and click RESTART

 

h. When the phone prompts for the unlock code simply enter the unlock code provided to you

 

i. Your phone is now permanently unlocked!


 

Samsung Galaxy S4 Only

 

1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#
 
a. Go to the Dial pad and dial *#0011#
 
b. Please click your MENU button (Bottom LEFT button) and click BACK on the menu that appears, Nothing will happen do not worry please move to the next step
 
c. Please click your MENU button AGAIN and this time click KEY INPUT

d. When the Key input box appears please input the number "1" and hit OK 

e. You will see a number 1 for a while, please wait until it changes into the SERVICE MENU
 
f. Please click [1] UMTS > [1] DEBUGGING SCREEN > [6] Phone Control > [6] Network LOCK

g. You will see 3 OPTIONS within Network LOCK

h. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

NOTE: If you see ENABLE_FLAG[1], contact us. If you see ENABLE_FLAG[0], continue on.
 
i. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
 
j. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

NOTE: If you see ENABLE_FLAG[1], contact us. If you see ENABLE_FLAG[0], continue on.
 
k. Restart the phone on the screen by holding the power button and click RESTART
 
l. When the phone prompts for the unlock code simply enter the unlock code provided to you
 
m. Your phone is now permanently unlocked!

 

 

 

 

 

*If this is not working, go to Solution #2

 



Samsung Galaxy Note 3

 

There is an error with the Galaxy Note 3 where sometimes when you enter the code it will display "Sim Network Unlock Unsuccessful", when in fact the device was unlocked. Try pulling the battery and restart the phone, if the prompt for "Sim Network Unlock Pin" no longer appears, the device has been successfully unlocked.

 


Solution #2


 


Follow these steps carefully.


1. Power off and on your phone with different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.

2. Type your Defreeze code (MCK code) and hit Unlock button. You will get "unsuccessful message" again but don't worry.

3. Now type the Unlock code (Network or NCK code) and hit Unlock button.


*If phone say "Network Lock Succesful" it worked, but if not, proceed to step 4.

4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad.   (CAUTION! This will reformat all your data!)

5. After phone restarts, type the Unfreeze code (MCK code) when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" screen and hit unlock button.


It will say "unsuccessful" again, don't worry!

6. Type the Unlock code (Network or NCK code) and hit Unlock button.

7. Your phone should now give you the message "Network Lock Successful"

Now your phone is successfully unlocked!


*If this is not working, go to Solution #3


 


Solution #3


1. Turn off the Wi-Fi on your phone and then turn device ON without SIM card.

Once it's on go to phone dial screen and DIAL: *7465625*638*#
it will bring you to the NETWORK LOCK screen.

- in MCC/MNC field enter code for the service provider your phone is originally from (eg 31026 for T-Mobile USA)

check here for list of codes: http://en.wikipedia.org/wiki/Mobile_Network_Code


*If your network has more than one mcc/mnc please try all of them this is very important

- in CONTROL KEY field enter the UNLOCK code
- hit OK
- you should get a message: LOCK SUCCESSFUL

Power phone down, insert SIM card you want your phone to work with and power on.

Views : 0
© 2017 All right reserved Dhaka Mobile (RealUnlocks.com)
Powered by Dhru Fusion